DIY boat craft: step-by-step instructions with a description of the work, a photo, a master class for beginners (children and adults)

Almost every person in childhood was engaged in the manufacture of paper boats, and this craft could be made in only a few ways.

Today, there are many options for making a boat, but not only from paper, but also from a host of other materials at hand.

Popular materials for making a boat

In order for the process of creating such a craft as a boat to be interesting for a child, you can not be limited to using paper, you can pay attention to the following materials:

  • Cardboard - can be used both in color and from ordinary boxes;
  • Egg trays;
  • Wooden ice cream sticks;
  • Plastic;
  • Wine corks.

The list of tools and materials can be increased, but, as a rule, this is suitable for those situations when some kind of competitive ship models are being created.

Making a paper boat

There are quite a few variations of making a craft paper boat out of paper with your own hands, but there is one simple and most popular method.

The peculiarity of such a craft is that the boat can stay on the water and the duration of this process directly depends on the density of the material.

To make such a boat, you must follow the following instructions:

  1. A rectangular sheet is prepared, it can be white or multi-colored. The sheet is folded in half and on the side where there is a fold, the middle is outlined.
  2. Focusing on the center, you should bend the sides, you should get the form of triangles.
  3. Those sections that protrude from below are bent up. Initially, this is done on one side, then the workpiece is turned over, and on the other hand, the same upward bend is made.
  4. There are corners on the sides that need to be refilled. Initially, the corner located on top is bent, for this it is wound up behind the main part of the craft. Similar actions are performed with the lower corner.
  5. The workpiece is straightened and given the shape of a square. The bottom corner, placed at the top layer of the figure, folds up. The craft is turned over, and similar actions are performed.
  6. The workpiece is straightened out again and folded into a square. Then the upper corners are gently pulled to the sides. Thus, a boat is obtained, for greater stability of which its bottom and sides are straightened.

Such a craft can be done with a child and will be much more interesting if you use colored paper.

Use of cardboard

For a greater scale of making crafts, you can make a boat out of cardboard. In this case, a number of materials will be required:

  • Cardboard - it is best to settle for corrugated;
  • Scissors;
  • Glue;
  • The container is deep;
  • Materials for painting the product;
  • The cloth;
  • Double sided tape.

Having prepared all the tools, you can start making the vessel:

  1. Details of the future ship are cut out of cardboard. The templates for the details of the craft are presented in the photo.
  2. All parts are connected to each other using double-sided tape.
  3. In parallel, a match is made, for this they take a wooden stick and 6-7 circles of cardboard, with a diameter of about 6 cm.
  4. Then you can start decorating the ship. For this, glue and water are diluted in a bowl in a 1: 1 ratio and the resulting mixture is coated with pre-crushed white paper. Pieces of paper are glued all over the surface of the boat. Thus, 5-6 layers of the composition are applied, and then the glue is allowed to dry.
  5. Then, using paints and brushes, you can paint the ship as you wish.

The prepared piece of fabric can be used to create a flag, which will later be attached to the mast.

A boat in the form of an applique

If, in addition to the child's entertainment, there is a desire to develop his fine motor skills and creativity, then you can make a craft boat in the form of an application.

To do this, you will need to stock up on a number of materials:

  • Colored paper and cardboard;
  • Pencil;
  • Glue;
  • Paper napkin.

The peculiarity of the applique is that already pre-prepared elements are attached to the base. Therefore, if this type of entertainment is planned with young children, then the following templates are prepared:

  • Ship;
  • 2 sails;
  • Flag;
  • 2 seagulls;
  • 2 waves;
  • 2 suns - one more, the other smaller.

The colors for these elements are chosen for our own consideration.

You can even involve a child in the process so that he himself chooses the colors of the elements, and it does not matter if even the sun is pink.

Next, the following manipulations are performed:

  1. 2 suns are glued onto a colored base. Small on top of large.
  2. A little space recedes from the sun and a boat is glued from below. 2 waves of different colors are glued on top of the boat.
  3. Then the sails are attached, initially small and then large.
  4. Moreover, the large sail is not fully glued, but only one edge of it is glued so that the craft comes out slightly voluminous.
  5. A flag is fastened and seagulls are located not far from it above the ship.

Such a theme can have a lot of plots, both simple for kids and more complex ones for lovers of crafts.

Making a boat out of shells

These kinds of crafts can always be purchased on the seaside and brought home to remind you of a wonderful vacation.

But if there is no desire to spend money, and there is free time, then you can make a boat out of shells on your own, this craft option will be even more memorable.

The following materials will be required:

  • Large shell for the base of the ship;
  • 2 flat shells, will act as a sail;
  • Wood skewers will act as sail locks;
  • Threads;
  • Glue;
  • Paint and varnish.

Now it's worth figuring out how to make a craft boat from these materials. To do this, follow the instructions:

  1. The base of the ship is placed on a pedestal. It can be any item, including a simple countertop, as long as the sink is in a stable position.
  2. Skewers are taken and alternately glued to the sink in an upright position.
  3. They take flat rounded shells and stick to the skewers, thus forming the sails.
  4. It is better to turn the shells with a pattern in one direction, so they look more spectacular.
  5. All masts are tied with threads. And to add texture to the sailboat, it can be painted red. Then everything is varnished.

A self-made boat will become a decoration of any home and it does not matter at all whether it is a huge sailboat made of shells or a simple paper version.

Photo craft boat

Interesting Articles...