DIY leather crafts: 110 photos, step-by-step instructions for working with leather at home for beginners

Handmade is gaining more and more popularity. DIY leather crafts are also gaining a trend. And it is not necessary to look for where to buy leather for crafts.

Old things and scraps will also work for them. The material is quite durable and wear-resistant, so it is quite possible to give it a second life.

How to choose material

Almost any material is suitable for leather crafts for beginners. It is worth relying on some advice when choosing it:

  • The skin should be soft and well dressed. So it will be easier for her to give the desired shape;
  • If you take material from an old thing, do not use those parts where various elements have been inserted: rivets, buttons. The part with a seam will also not work, because it will be difficult to process;
  • If the product is already so old that the leather has worn out and lost its attractive appearance, it is better to throw it away. Or take it as a material for a trial craft.

How to work with the material

For each master class on making leather crafts, you need to select your material and work with it in different ways, based on the principles:

  • Each product requires a specific type of material. For example, thin leather is better for jewelry. This happens on gloves;
  • If you are new to this business, it may be that the first time you get not the result you would like to see. Therefore, you need to start with the material that is not a pity for stuffing your hand;
  • The pattern is applied to the wrong side of the material, you can circle it with a regular pen;
  • If the parts are paired, but they are cut out in the same direction;
  • It is better not to connect the details with pins, because the material is rather fragile, after them visible holes may remain;
  • If there are any impurities on the skin, you can remove them with plain water and a sponge;
  • If the skin is too hard and rough, you can apply glycerin to it, it will soften the material somewhat;
  • The skin is not ironed with a hot iron, only slightly warm, while the material is pre-soaked;
  • Grinding is a process where the leather is manually thickened. It needs to be studied before taking on serious work.

Technique types

In the photo of leather crafts, you can see that works made of this material differ from each other in appearance. You can make products in the form of the following techniques:

  • Mosaic - suitable for a panel, it looks very unusual and interesting;
  • The usual applique, where you can even combine different materials, does not already mean one type with different structures;
  • Origami is a simple technique, having studied which, you can get a beautiful figure at the exit;
  • Decorating other materials or objects.

A combination of several techniques in one product is allowed. In this case, the skin can be dyed; both spray paint and oil paint are suitable.

You can also carry out staining with solutions that are created with your own hands.

For example, ordinary soda can give a brown tint to a material, and a gray tint is obtained using copper sulphate. The finished product must also be coated with a product to make it look more interesting.

Keychain making

A keychain works well as an object for making leather pieces. Not much material is required for it, moreover, it is with this thing that you can start acquaintance with the techniques.

What will be needed for work:

  • The skin itself;
  • Keychain ring;
  • Cardboard;
  • Filling for the product;
  • Glue;
  • A small piece of plastic with which you can press the product.

Stages of work:

  1. This keychain is suitable for a man, but you can take absolutely any pattern and shape.
  2. The basis for this keychain is a knife cover, the stencil of which is first drawn on a cardboard base, and only then transferred to the skin;
  3. Two identical parts of the keychain are cut;
  4. When cutting, the scissors must be held perpendicularly so that the cut is even, and the parts are identical with respect to each other;
  5. Another similar part is cut out of plastic, only 5 mm less on all sides;
  6. Two leather parts must be glued together by inserting a plastic element between them. It is needed so that the product is even, does not bend or deform;
  7. When the glue has dried, you can fill the glued part with filler and finish gluing the product;
  8. On each side of the product, now you need to make 2 holes through which the lacing will be threaded for decoration;
  9. Since the keychain is male, you can insert an artificial canine into the lacing, also fixing it with glue for reliability. It also remains to thread the ring and chain;
  10. The product is ready, it can be made even with a child, such a children's leather craft can be presented as a gif.webpt to dad or grandfather.

Flower

Leather crafts for kindergarten can be made in the form of flowers or even a whole bouquet.

To create a flower you will need:

  • Material;
  • Pattern for petals;
  • Secondary glue ";
  • PVA glue.

Stages of work:

  1. Three patterns need to be cut out of cardboard. There will be three petals: one 3 centimeters, the second 4 centimeters and the last largest - 5 centimeters;
  2. Now you need to cut out the petals from the skin, only 5 pieces of each size;
  3. A circle is also cut out of leather, which will serve as the basis for the product;
  4. Each petal part from the inside must be lubricated with PVA glue, and then twisted into a bundle, holding the parts in a twisted state for a while. After about 5 minutes, you can straighten the parts, they will become not smooth, but compressed;
  5. Make several leaves that need to be twisted in the same way;
  6. Now the petals, and last of all, the leaves need to be glued to the round base;
  7. The middle can be decorated with a button, beads, beads or sequins.

You can make up a whole composition of such flowers, or leave it as a separate element. If you attach a pin on the back, you get a full-fledged brooch.

You can make a flower an ornament for a bracelet or hair tie.

You can also make a rose as a flower. Only the petals will already be of two types - small and large, 10 pieces each. Take real flower petals as a basis.

Stages of work:

  • Each petal heats up, due to which the shape changes;
  • One petal must be greased with glue and twisted into a flagellum - this will be the base to which all other parts of the rose must be glued;
  • The small parts are glued first, then the big ones go.
  • After the glue has dried and all the parts are firmly seized together, you can paint the rose.

Photo of leather crafts

Interesting Articles...