Do-it-yourself fakes from cones step by step: a needlework lesson at home. Learning how to make a craft from acorns and cones + 130 photos

Among the natural materials used for children's needlework, cones are one of the most popular.

Such raw materials are suitable not only for do-it-yourself school crafts from cones, but also for creating original gizmos that can decorate the interior or become a very effective gif.webpt.

Collection and preparation of material

Spruce and pine cones are best harvested in the fall. You should select undamaged copies. Then clean them of dirt, rinse in water and soak in a vinegar solution (one-to-one ratio). Then the cones are set aside to dry.

Combination of materials

To make the most effective cone craft, it is recommended to use a number of other materials. Usually these are:

  • Acorns;
  • Chestnuts;
  • Bright autumn leaves;
  • Stones and shells;
  • Beads and beads;
  • Plasticine.

Candlestick

A beautiful and functional piece of furniture, perfect for decorating a romantic meeting.

In the photographs of handicrafts made from cones, it can be seen that more than one version of making a beautiful lamp is possible. Let's consider two options.

  1. When working on the first candelabra variety, the most important thing is to carefully process the bottom of the cone so that it becomes stable.
  2. Then the extra "teeth" are removed from the upper part and a recess is made to securely place the candle.

Another design option is also possible.

  1. The candles are placed on a stand.
  2. On all sides, the stand is decorated with painted cones, between which you can lay small branches of needles.

Little bird

To create a heavenly bird you will need:

  • Paints and brush;
  • Ping-pong ball;
  • A sheet of yellow paper;
  • Chenille red wire;
  • Felt-tip pen;
  • Cone.

The process of work begins with coloring the ball red - it will become the head of a bird.

Then:

  • The wings and beak of a bird are cut out of paper;
  • Eyes are formed on the ball and the nose is glued;
  • The singer's legs are made of wire.

The bird is ready. You can use the little thing as an interior decoration or present it to someone as a funny handmade souvenir.

Owl

More complex is the craft of the bird of wisdom. This will take about half an hour and will require parental supervision - one of the operations is performed with scissors.

It is better to handle the lump with a knife (to give stability) to an adult, not a child.

  1. At the beginning of the work, you will need to draw the head of an owl.
  2. You can find it on the Internet and print the template.
  3. However, an independent image of an owl does not require special artistic talent, not to mention the design of the legs and wings of a bird.

Then all paper parts should be painted.

At the last stage, all the blanks are glued to the "body" of the owl and the wise bird is ready to decorate the interior of the room.

Illustration for a fairy tale

The simplest cones crafts for children include making three little pigs. Only a few things are required to work:

  • Paints and brush;
  • Three cones;
  • Plasticine.

Progress

  1. The cones are painted in the colors of the suits Nif-Nif, Naf-Naf and Nuf-Nuf.
  2. The heels, ears and legs of the heroes of the fairy tale are made of pink plasticine.
  3. The whites and pupils of the eyes are made of plasticine of the corresponding colors.

The heroes of your favorite fairy tale are ready to decorate the interior of the children's corner at school.

Swan Lake

A very interesting idea for crafts from cones can be the organization of the process of making snow-white swans floating on the water surface. To successfully complete the work, you should prepare:

  • Cones;
  • Fluffy (chenille) wire;
  • Feathers;
  • White paint and brush;
  • Toothpick;
  • Metal dish (lake).

A step-by-step instruction for decorating a lake with swans swimming on it will look like this:

  1. The buds turn white.
  2. The curved neck and head of swans are formed from white chenille wire.
  3. A piece of a toothpick is attached to the head, acting as a beak.
  4. Feathers are located on the cone (body of the bird).
  5. The tail of a swan is formed from the longest feathers.

The composition will take on a finished look when the swans are placed on a platter.

Another swan

There is another, easier way to make a beautiful bird. In this option, you will need to work:

  • Plasticine of white, black, red colors;
  • Cotton wool;
  • Glue.

Step-by-step instruction:

  1. The first step is the most difficult because the neck and head of the bird should be made.
  2. The beak should be made from the red material, and the bridle should be made from the black material (the transition from the beak to the head).
  3. The blank is attached to the base of the cone.
  4. Then cotton wool is glued all over the "body" of the swan. A small space remains at the bird's neck, giving the impression of wings.
  5. A piece of blue plasticine is rolled out, attached to a sheet of paper (lake or river) and the finished product is fixed on this surface.

Dinosaurs

Recently, prehistoric giants have become unusually popular characters in cartoons and comics. Kids will be happy to start making miniature versions of large and outlandish animals.

Consider a couple of master classes on creating crafts from cones, and we will find out with what materials and tools you can easily make a dinosaur.

In addition to the main element - cones, you will need plasticine of several colors. The process itself will consist of only four stages:

  • A long neck and an equally large tail are made of blue plastic material;
  • Of yellow - a large ball - the muzzle of the monster and several small balls - ridges on the neck and tail;
  • Four green plasticine cylinders will act as legs;
  • At the last stage of the process, all the elements are connected and attached to the body of the dinosaur.

"Shishkosaurus"

This is a more complex structure and for its manufacture you will need:

  • Eight spruce cones;
  • Wire;
  • Sunflower seeds;
  • Beads;
  • Plasticine.

Operating procedure

  1. The upper competition of one of the cones, which will become the neck of the dinosaur, is cut off.
  2. The "neck" is glued to the smaller bump (torso). For greater reliability of fastening, in addition to glue, it is necessary to use wire.
  3. A small bump (head) is attached to the neck.
  4. The eyes of a prehistoric monster are formed on the head. Plasticine and beads are used.
  5. Four bumps (legs) are attached to the body.
  6. The smallest bump will act as a tail.
  7. Pumpkin seeds are glued along the entire length of the ridge and tail - the crest of the monster.

You can give your child the opportunity to modify the resulting figure.

Let's say the kid wants the dragon to look like a character from the cartoon about Shrek. Let him attach wings from leaves or make them from plasticine.

Photo of fakes from cones

Interesting Articles...